Our off-grid cabin kits are an easy way to add a solar power system to your cabin or small home.
Developed from our experiences in designing custom off-grid power systems, our selection of pre-designed systems eliminates the need for a lengthy design process and are easily expandable.
Each system contains all the components needed to supply power to your load center, including batteries, inverters, solar panels, solar controllers, and ground mounts.

Each kit also includes a wiring diagram with required wire and fuse sizing for easier installation.
General electrical supplies such as wires, lugs, conduit, and sub-panels are not included. A recommended list of supplies and suppliers is provided.

Additional batteries can be purchased to be installed with the kit. Batteries can also be added anytime after the initial kit installation. Please contact Off-Grid Power Systems for assistance in selecting additional batteries.

Features:

• Complete off-grid solar system with 4,920W solar array and 10kWh 48VDC battery bank
• 5kVA (4kW) inverter continuous output power
• Includes solar array ground mount (for clay soils or clay soils with rocks) and pre-built solar protection and disconnect enclosures
  • Soil types other than clay – such as shale or bedrock near the surface – may require a different foundation. Please contact OGPS for assistance.
• Detailed wiring diagram and supplies list
• Instructions for driving the solar racking ground screws and assembling the rack
  • Note: You will need a tractor or skid steer and auger attachment with hexagonal shank
• Modular Lynx system allows for future expansion
• Integrated battery heating system

Kits Include:

• 1x MultiPlus-II 48/5000/70-95
• 1x SmartSolar MPPT RS 450/100
• 1x Lynx Power In
• 1x Lynx Distributor
• 1x Cerbo GX
• 1x GX Touch 50
• 1x GX Touch 50 Wall Mount
• 2x Pytes V5° 48V 100Ah
• 1x Interface MK3-USB
• 12x Hyperion 410W P-Type Bifacial Solar Panels
• 1x Ready Rack Ground Mount Solar Racking Kit with Ground Screws – Hyperion 410W
• 1x Pre-wired solar protection & disconnect
• 1x Inverter pre-charge circuit & disconnect
• 1x MPPT disconnect
• 2x Class T fuse
• 2x Pytes V5° Battery Brackets
• 1x VE.Can to CAN-bus BMS type A Cable